BondTAC 800S Diluent & Surface Lubricant (Polystyrene-Safe)
Click Here to Download the BondTAC 800S Data Packet
BondTAC™ 800S is a unique blend of liquids for use in adjusting the viscosity of BondTAC™ S-1430 and for lubricating BondTAC™ coated surfaces in order to adhere components and boards that require movement for adjustment.
WHERE TO USE
AS WITH ALL FLAMMABLE, SOLVENT-BASED PRODUCTS, EXERCISE CAUTION WHEN USING THIS PRODUCT.
BondTAC™ 800S Diluent and Surface Lubricant will permit adjustments to BondTAC™ S-1430 coated surfaces in order to attain the proper fit of components and boards. Allow a minimum of one hour drying time after application of BondTAC™ S-1430, and then apply a sparing coat of BondTAC™ 800S to the surface of the BondTAC™ S-1430, using a brush or paint roller. Slide and fit the board or component into place within five minutes of BondTAC™ 800S application.
In some instances, such as sub-zero temperatures, or where BondTAC™ S-1430 has been permitted to evaporate, viscosity may be adjusted by slight addition of BondTAC™ 800S.
When necessary, use BondTAC™ 800S to clean and thin dried BondTAC™ S-1430 Waterproof Elastomeric Adhesive Membrane from brushes, tools, fabrics, etc. It can also be used to remove oil, wax and grease from most finishes and may be used to remove bonded laminates.