Gluetek Mena

Contact Info

Gluetek Mena
Office 509 - 5th Floor
Dar Al Salam Building
Corniche St. Abu Dhabi, UAE

Phone: +97125222750

Fax: +97126781070

Gluetek Mena

United States Distribution Headquarters: Gluetek

Website: www.gluetek.com

European Distribution Headquarters: Gluetek Europa

Website: www.gluetekeuropa.com

BondTAC 800 Diluent & Surface Lubricant 2017-11-02T18:32:08+00:00

 

 

800

 

 

 

Can

BondTAC 800 Diluent & Surface Lubricant

Click Here to Download the BondTAC 800 Data Packet

DESCRIPTION:

BondTAC™ 800 is a unique blend of liquids for use in adjusting the viscosity of BondTAC™ 1500 and for lubricating BondTAC™ coated surfaces in order to adhere components and boards that require movement for adjustment.

WHERE TO USE

AS WITH ALL FLAMMABLE, SOLVENT-BASED PRODUCTS, EXERCISE CAUTION WHEN USING THIS PRODUCT.

BondTAC™ 800 Diluent and Surface Lubricant will permit adjustments to BondTAC™ 1500 coated surfaces in order to attain the proper fit of components and boards. Allow a minimum of one hour drying time after application of BondTAC™ 1500, and then apply a sparing coat of BondTAC™ 800 to the surface of the BondTAC™ 1500, using a brush or paint roller. Slide and fit the board or component into place within five minutes of BondTAC™ 800 application.

In some instances, such as sub-zero temperatures, or where BondTAC™ 1500 has been permitted to evaporate, viscosity may be adjusted by slight addition of BondTAC™ 800.

When necessary, use BondTAC™ 800 solvent to clean dried BondTAC™ 1500 Low-VOC Waterproof Elastomeric Adhesive Membrane from brushes, tools, fabrics, etc. It can also be used to remove oil, wax and grease from most finishes and may be used to remove bonded laminates.